Author
CMACEWHEEL
Share
Total Views: 4,631Daily Views: 5
CMACEWHEEL Electric bikes M8 Display Manual
Parameter | Factory Settings | CMACEWHEEL ELECTRIC BIKES
LCD M-8 Parameter Programming Description |
---|---|---|
P01 | 0002 | BACKLIGHT BRIGHTNESS: 1=DARK; 2=MID 3=HIGH |
P02 | 0000 | MILEAGE UNIT: 0=KM; 1=MLS |
P03 | 0048 | SYSTEM VOLTAGE (24V, 36V, 48V) |
P04 | 0010 | DISPLAY SLEEP TIME: 0=NO DORMANCY; SLEEP TIME= 1-60 MIN |
P05 | 05 | PEDAL ASSYST (PAS) LEVELS: 0-3, 1-3, 0-5, 1-5 |
P06 | 22.0 | WHEEL DIAMETER UNIT INCH: IN 0.1 STEPS |
P07 | 0001 | SPEED MEASUREMENT MAGNETIC STEEL: RANGE 1-255 |
P08 | 0100 | SPEED LIMIT RANGE: 0-100km/h (100 = MAX SPEED) |
P09 | 0000 | ZERO START SETTINGS: 0=ZERO START; 1=NON ZERO START |
P10 | 0002 | DRIVE MODE SETTINGS (THROTTLE): 0=POWER ASSISTED MODE (NO THROTTLE); 1=THROTTLE ONLY (NO PAS); 2=PAS + THROTTLE |
P11 | 0001 | PAS SENSITIVITY RANGE: 1-24 |
P12 | 0003 | START PAS INTENSITY RANGE: 0-5 |
P13 | 0012 | POWER BOOSTER MAGNETIC STEEL DISK TYPE: 5, 8, 12 |
P14 | 0013 | CONTROLLER CURRENT LIMIT (AMPS): 1-20A |
P15 | 390 | MIN CONTROLLER UNDERVOLTAGE SHUTOFF (VOLTS) |
P16 | 0000 | CRUISE ON/OFF SETTINGS: 0=ENABLED; 1=DISABLED |
P17 | 0000 | ODO ZERO SETTINGS: PRESS UP KEY >5sec = ODO RESET |
BUTTON OPERATION PROGRAMMING MODE:
1.Press POWER Button for a long time to save the current values.
2.Press POWER Button for a short time to switch to the next parameters and save changed
values of the previous parameters
3.Press UP/DOWN Button to change values.
4.Press both UP/DOWN Buttons to Exit Settings and save the parameters or values.
BUTTON OPERATION NORMAL MODE:
-Short Press Up/Down button while Riding: Changing PAS Level
-Short Press Power ON/OFF (MODE) button while riding: Switch Display Data
-Long Press Down Key in Static State at 0km/h: Entering 6km/h Cruise Mode (Brake or Short
Press to Exit)
-Long Press Up Key in Static State or while driving: Turn On/Off Headlights
Any More Questions, Please Contact Us
Stay in the loop